334
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show telnet server
show telnet server
To display the Telnet server status, use the show telnet server command.
show telnet server
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the Telnet server status:
switch# show telnet server
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
telnet server enable Enables the Telnet server.
To Next Page
Loading...
