306
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show role feature
show role feature
To display the user role features, use the show role feature command.
show role feature [detail | name feature-name]
Syntax Description
Command Default Displays a list of user role feature names.
Command Modes EXEC mode
Command History
Examples This example shows how to display the user role features:
switch# show role feature
aaa (AAA service related commands)
arp (ARP protocol related commands)
cdp (Cisco Discovery Protocol related commands)
l3vm (Layer 3 virtualization related commands)
ping (Network reachability test commands)
snmp (SNMP related commands)
radius (Radius configuration and show commands)
syslog (Syslog related commands)
tacacs (TACACS configuration and show commands)
install (Software install related commands)
license (License related commands)
callhome (Callhome configuration and show commands)
platform (Platform configuration and show commands)
access-list (IP access list related commands)
svi (Interface VLAN related commands)
vlan (Virtual LAN related commands)
eth-span (Ethernet SPAN related commands)
ethanalyzer (Ethernet Analyzer)
spanning-tree (Spanning Tree protocol related commands)
acl (FC ACL related commands)
sfm (ISCSI flow related commands)
fcns (Fibre Channel Name Server related commands)
fcsp (Fibre Channel Security Protocol related commands)
fdmi (FDMI related commands)
fspf (Fabric Shortest Path First protocol related commands)
rlir (Registered Link Incident Report related commands)
rscn (Registered State Change Notification related commands)
span (SPAN session relate commands)
vsan (VSAN configuration and show commands)
detail (Optional) Displays detailed information for all features.
name feature-name (Optional) Displays detailed information for a specific feature. The name
can be a maximum of 16 alphanumeric characters and is case sensitive.
Release Modification
5.2(1)N1(1) This command was introduced.
To Next Page
Loading...
