Cisco Nexus 5500 Series - Show Checkpoint System

264
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show checkpoint system
show checkpoint system
To display only the system-configured checkpoints, use the show checkpoint system command.
show checkpoint system
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the rollback checkpoints defined by the system:
switch# show checkpoint system
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
checkpoint Creates a checkpoint.
rollback Rolls back the configuration to any of the saved checkpoints.
show checkpoint Displays rollback checkpoints.
show checkpoint user Displays user-configured rollback checkpoints.