Cisco Nexus 5500 Series - Show Startup-Config Arp

327
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show startup-config arp
show startup-config arp
To display the Address Resolution Protocol (ARP) configuration in the startup configuration, use the
show startup-config arp command.
show startup-config arp [all]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the ARP startup configuration:
switch# show startup-config arp
!Command: show running-config arp
!Time: Mon Aug 23 07:33:15 2010
version 5.2(1)N1(1)
ip arp timeout 2100
ip arp event-history errors size medium
interface Vlan10
ip arp 10.193.131.37 00C0.4F00.0000
switch#
Related Commands
all (Optional) Displays configured and default information.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
copy running-config
startup-config
Copies the running configuration to the startup configuration file.
ip arp event-history
errors
Logs ARP debug events into the event history buffer.
ip arp timeout Configures an ARP timeout.
ip arp inspection Displays general information about DHCP snooping.
show running-config
arp
Displays the ARP running configuration.