Cisco Nexus 5500 Series - Command Description

305
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show role
9 permit command traceroute *
8 permit command telnet6 *
7 permit command telnet *
6 permit command ping6 *
5 permit command ping *
4 permit command ssh6 *
3 permit command ssh *
2 permit command enable *
Role: default-role
Description: This is a system defined role and applies to all users.
vsan policy: permit (default)
Vlan policy: permit (default)
Interface policy: permit (default)
Vrf policy: permit (default)
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
5 permit command feature environment
4 permit command feature hardware
3 permit command feature module
2 permit command feature snmp
1 permit command feature system
Role: priv-15
Description: This is a system defined privilege role.
vsan policy: permit (default)
Vlan policy: permit (default)
Interface policy: permit (default)
Vrf policy: permit (default)
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
1 permit read-write
Role: MyRole
Description: new role
vsan policy: permit (default)
Vlan policy: permit (default)
Interface policy: permit (default)
Vrf policy: permit (default)
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
1 deny command pwd
switch#
Related Commands Command Description
role name Configures user roles.