317
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show running-config dhcp
show running-config dhcp
To display the Dynamic Host Configuration Protocol (DHCP) snooping configuration in the running
configuration, use the show running-config dhcp command.
show running-config dhcp [all]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines To use this command, you must enable the DHCP snooping feature using the feature dhcp command.
Examples This example shows how to display the DHCP snooping configuration:
switch# show running-config dhcp
!Command: show running-config dhcp
!Time: Mon Aug 23 09:09:11 2010
version 5.2(1)N1(1)
feature dhcp
ip dhcp snooping
ip dhcp snooping information option
service dhcp
ip dhcp relay
ip dhcp relay information option
ip arp inspection filter arp-acl-01 vlan 15,37-48
switch#
This example shows how to display the DHCP snooping configuration with the default information:
switch# show running-config dhcp all
!Command: show running-config dhcp all
!Time: Mon Aug 23 09:10:11 2010
version 5.2(1)N1(1)
feature dhcp
ip dhcp snooping
all (Optional) Displays configured and default information.
Release Modification
5.2(1)N1(1) This command was introduced.
To Next Page
Loading...
