Cisco Nexus 5500 Series - Aaa Authentication Login Mschap Enable

8
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter A Commands
aaa authentication login mschap enable
aaa authentication login mschap enable
To enable Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) authentication at login,
use the aaa authentication login mschap enable command. To revert to the default, use the no form of
this command.
aaa authentication login mschap enable
no aaa authentication login mschap enable
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History
Examples This example shows how to enable MS-CHAP authentication:
switch(config)# aaa authentication login mschap enable
This example shows how to disable MS-CHAP authentication:
switch(config)# no aaa authentication login mschap enable
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show aaa
authentication
Displays the status of MS-CHAP authentication.