Cisco Nexus 5500 Series - Show Ip Arp Inspection Log

285
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show ip arp inspection log
show ip arp inspection log
To display the Dynamic ARP Inspection (DAI) log configuration, use the show ip arp inspection log
command.
show ip arp inspection log
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the DAI log configuration:
switch# show ip arp inspection log
Syslog Buffer Size : 12
Syslog Rate : 5 entries per 1 seconds
switch#
Related Commands
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
clear ip arp inspection log Clears the DAI logging buffer.
ip arp inspection log-buffer Configures the DAI logging buffer size.
show ip arp inspection Displays the DAI configuration status.
show running-config dhcp Displays DHCP snooping configuration, including the DAI
configuration.