211
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter P Commands
permit (MAC)
Examples This example shows how to configure a MAC ACL named mac-ip-filter with a rule that permits all IPv4
traffic between two groups of MAC addresses:
switch(config)# mac access-list mac-ip-filter
switch(config-mac-acl)# permit 00c0.4f00.0000 0000.00ff.ffff 0060.3e00.0000 0000.00ff.ffff
ip
switch(config-mac-acl)#
Related Commands Command Description
deny (MAC) Configures a deny rule in a MAC ACL.
mac access-list Configures a MAC ACL.
remark Configures a remark in an ACL.
show mac access-list Displays all MAC ACLs or one MAC ACL.
To Next Page
Loading...
