Cisco Nexus 5500 Series - Page 274

260
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show checkpoint
no password strength-check
ip domain-lookup
ip domain-lookup
hostname switch
ip access-list ip1
class-map type qos class-fcoe
match cos 4
class-map type qos match-all cq1
match cos 4
match precedence 7
class-map type qos match-all cq2
match cos 5
match dscp 10
class-map type qos match-any cq3
match precedence 7
<--output truncated-->
switch#
This example shows how to display information about a specific checkpoint:
switch# show checkpoint chkpnt-1
--------------------------------------------------------------------------------
Name: chkpnt-1
!Command: Checkpoint cmd vdc 1
!Time: Mon Sep 6 09:40:47 2010
version 5.2(1)N1(1)
feature telnet
feature tacacs+
cfs eth distribute
feature private-vlan
feature udld
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature fex
username adminbackup password 5 ! role network-operator
username admin password 5 $1$KIPRDtFF$7eUMjCAd7Nkhktzebsg5/0 role network-admin
no password strength-check
ip domain-lookup
ip domain-lookup
hostname switch
ip access-list ip1
class-map type qos class-fcoe
match cos 4
class-map type qos match-all cq1
match cos 4
match precedence 7
--More--
switch#
This example shows how to display all configured rollback checkpoints:
switch# show checkpoint all