Cisco Nexus 5500 Series - Page 314

300
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show radius-server
This example shows how to display information for a specified RADIUS server:
switch# show radius-server 192.168.1.1
192.168.1.1:
available for authentication on port:1812
available for accounting on port:1813
RADIUS shared secret:********
idle time:0
test user:test
test password:********
switch#
This example shows how to display the RADIUS directed request configuration:
switch# show radius-server directed-request
disabled
switch#
This example shows how to display information for RADIUS server groups:
switch# show radius-server groups
total number of groups:2
following RADIUS server groups are configured:
group radius:
server: all configured radius servers
deadtime is 0
group RadServer:
server: 192.168.1.1 on auth-port 1812, acct-port 1813
deadtime is 0
switch#
This example shows how to display information for a specified RADIUS server group:
switch# show radius-server groups RadServer
group RadServer:
server: 10.193.128.5 on auth-port 1812, acct-port 1813
deadtime is 0
switch#
This example shows how to display sorted information for all RADIUS servers:
switch# show radius-server sorted
timeout value:5
retransmission count:1
deadtime value:0
source interface:any available
total number of servers:1
following RADIUS servers are configured:
192.168.1.1:
available for authentication on port:1812
available for accounting on port:1813
RADIUS shared secret:********
switch#
This example shows how to display statistics for a specified RADIUS servers:
switch# show radius-server statistics 192.168.1.1
Server is not monitored
Authentication Statistics
failed transactions: 0
sucessfull transactions: 0