Cisco Nexus 5500 Series - Page 328

314
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show running-config aclmgr
:
vlan access-map vacl-mac
match mac address acl-mac
action forward
statistics per-entry
vlan filter vacl-mac vlan-list 300
interface Ethernet1/1
ipv6 port traffic-filter denv6 in
interface Ethernet1/2
ip port access-group voice in
interface Ethernet1/9
ipv6 port traffic-filter denv6 in
interface Ethernet1/10
ipv6 port traffic-filter denv6 in
line vty
access-class myACList in
access-class myACList out
ipv6 access-class myI6List out
switch#
This example shows how to display only the VTY running configuration:
switch# show running-config aclmgr | begin vty
line vty
access-class myACList in
access-class myACList out
ipv6 access-class myI6List out
switch#
Related Commands Command Description
access-class Configures access classes for VTY.
copy running-config
startup-config
Copies the running configuration to the startup configuration file.
ip access-class Configures IPv4 access classes for VTY.
ipv6 access-class Configures IPv6 access classes for VTY.
show startup-config
aclmgr
Displays the ACL startup configuration.