Cisco ONS 15454 - Fiber Management

1-53
Cisco ONS 15454 Reference Manual, R7.0.1
OL-9217-01
Chapter 1 Shelf and Backplane Hardware
1.11 1.11.1 Fiber Management
Figure 1-32 Managing Cables on the Front Panel
1.11.1 Fiber Management
The jumper routing fins are designed to route fiber jumpers out of both sides of the shelf. Slots 1 to 6
exit to the left, and Slots 12 to 17 exit to the right. Figure 1-33 shows fibers routed from cards in the left
slots, down through the fins, then exiting out the fiber channel to the left. The maximum capacity of the
fiber routing channel depends on the size of the fiber jumpers. Table 1-23 gives the maximum capacity
of the fiber channel for each side of the shelf, for the different fiber sizes.
Figure 1-33 Fiber Capacity
F
A
N
F
A
IL
C
R
IT
M
A
J
M
IN
145262
Cable-routing
channel posts
Fold down
front door
Fiber guides
96518