EasyManua.ls Logo

Cisco ONS 15454 - A.5.9 DS3 XM-6 Card Specifications

Cisco ONS 15454
728 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A-24
Cisco ONS 15454 Reference Manual, R7.0.1
OL-9217-01
Appendix A Hardware Specifications
A.5 A.5.9 DS3XM-6 Card Specifications
Pulse amplitude: 0.36 to 0.85 V peak-to-peak
Loopback modes: Terminal and facility
Line build out: 0 to 225 feet (0 to 68.8 meters); 226 to 450 feet (68.9 to 137.2 meters)
Interface: BNC, SMB, UBIC and MiniBNC connectors
Surge protection: Telcordia GR-1089
Operating temperature:
I-Temp (15454-DS3XM-12): –40 to 149 degrees Fahrenheit (–40 to +65 degrees Celsius)
Note The I-Temp symbol is displayed on the faceplate of an I-Temp compliant card. A card
without this symbol is C-Temp compliant.
Operating humidity: 5 to 95 percent, noncondensing
Power consumption: 34 W, 0.71A at –48 V, 116.1 BTU/hr
Dimensions
Height: 12.65 in. (321.3 mm)
Width: 0.716 in. (18.2 mm)
Depth: 9.00 in. (228.6 mm)
Card weight: 1.8 lb (0.8 kg)
A.5.9 DS3XM-6 Card Specifications
The DS3XM-6 card has the following specifications:
Input
Bit rate: 44.736 Mbps +/–20 ppm
Frame format: DS-3 ANSI T1.107-1988
Line code: B3ZS
Termination: Unbalanced coaxial cable
Input impedance: 75 ohms +/–5 percent
Cable loss: Max 450 feet 734A, RG-59, 728A/Max 79 feet RG-179
AIS: TR-TSY-000191 compliant
Output
Bit rate: 44.736 Mbps +/– 20 ppm
Frame format: DS-3 ANSI T1.107-1988
Line code: B3ZS
Termination: Unbalanced coaxial cable
Input impedance: 75 ohms +/–5 percent
Cable loss: Max 450 feet 734A, RG-59, 728A/Max 79 feet RG-179
AIS: TR-TSY-000191 compliant
Power level: –1.8 to +5.7 dBm

Table of Contents

Other manuals for Cisco ONS 15454

Related product manuals