Cisco ONS 15454 - A.6.18 OC192 SR1;STM64 IO Short Reach Card Specifications

A-43
Cisco ONS 15454 Reference Manual, R7.0.1
OL-9217-01
Appendix A Hardware Specifications
A.6 A.6.18 OC192SR1/STM64IO Short Reach Card Specifications
– Maximum receiver level: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications,
page A-4)
– Minimum receiver level: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications,
page A-4)
– Receiver: PIN PD
– Receiver input wavelength range: Depends on SFP
• Environmental
– Operating temperature: –40 to +149 degrees Fahrenheit (–40 to +65 degrees Celsius)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 38.00 W, 0.79 A at –48 V, 129.66 BTU/hr
• Dimensions
– Height: 12.650 in. (321.3 mm)
– Width: 0.716 in. (18.2 mm)
– Depth: 9.000 in. (228.6 mm)
– Depth with backplane connector: 9.250 in. (235 mm)
– Weight not including clam shell: 3.1 lb (1.3 kg)
• Wavelength plan. Currently available wavelengths and versions of the 15454_MRC-12 card:
– For ONS-SC-2G-30.3 through ONS-SC-2G-60.0 SFPs: 1530.33 nm to 1560.61 nm
(32 distinct wavelengths at 100 GHz spacing)
– For ONS-SE-622-1470 through ONS-SE-622-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)
– For ONS_SE-155-1470 through ONS-SE-155-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)
A.6.18 OC192SR1/STM64IO Short Reach Card Specifications
Note The OC192SR1/STM64IO Short Reach card is designated as OC192-XFP in CTC.
The OC192SR1/STM64IO Short Reach card has the following specifications:
• Line
– Bit rate: OC-192 (9.9520 Gbps)
– Fiber: 1310-nm single-mode
– Connectors: LC duplex connector for the XFP
– Compliance: Telcordia GR-253-CORE
• Transmitter
– Maximum transmitter output power: –1 dBm
– Minimum transmitter output power: –6 dBm
• Receiver
– Maximum receiver level: –1 dBm