Cisco ONS 15454 - A.6.1 OC3 IR 4;STM1 SH 1310 Card Specifications

A-26
Cisco ONS 15454 Reference Manual, R7.0.1
OL-9217-01
Appendix A Hardware Specifications
A.6 A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
OC48 LR/STM16 LH AS 1550, OC48 ELR 100 GHz, OC48 ELR 200 GHz, OC192 SR/STM64 IO 1310,
OC192 IR/STM64 SH 1550, OC192 LR/STM64 LH 1550, OC192 LR/STM64 LH ITU 15xx.xx,
15454_MRC-12 (12-port), OC192SR1/STM64IO Short Reach, and OC192/STM64 Any Reach cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information.
A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
The OC3 IR 4/STM1 SH 1310 card has the following specifications:
• Line
– Bit rate: 155.52 Mbps
– Code: Scrambled non-return to zero (NRZ)
– Fiber: 1310-nm single-mode
– Loopback modes: Terminal and facility
– Connector: SC
– Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957
• Transmitter
– Maximum transmitter output power: –8 dBm
– Minimum transmitter output power: –15 dBm
– Center wavelength: 1274 to 1356 nm
– Nominal wavelength: 1310 nm
– Transmitter: Fabry Perot (FP) laser
– Extinction Ratio: 8.2 dB
– Dispersion Ratio: 96 ps/nm
• Receiver
– Maximum receiver level: –8 dBm at BER 1 * 10 exp – 12
– Minimum receiver level: –28 dBm at BER 1 * 10 exp – 12
– Receiver: InGaAs/InP photodetector
– Link loss budget: 13 dB
– Receiver input wavelength range: 1274 to 1356 nm
– Jitter tolerance: Telcordia GR-253/ITU-T G.823 compliant
• Environmental
– Operating temperature:
C-Temp (15454-OC34IR1310): +23 to +113 degrees Fahrenheit (–5 to +45 degrees Celsius)
I-Temp (15454-OC34I13-T): –40 to 149 degrees Fahrenheit (–40 to +65 degrees Celsius)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 19.20 W, 0.40 A at –48 V, 65.56 BTU/hr
• Dimensions
– Height: 12.650 in. (321.3 mm)