3-31
Cisco ONS 15454 Reference Manual, R7.0.1
OL-9217-01
Chapter 3 Electrical Cards
3.10 3.10.10 DS3XM-12 Port-Level Indicators
3.10.10 DS3XM-12 Port-Level Indicators
You can find the status of the twelve DS3XM-12 card ports by using the LCD screen on the ONS 15454
fan-tray assembly. Use the LCD to quickly view the status of any port or card slot; the screen displays
the number and severity of alarms for a given port or slot.
Table 3-15 DS3XM-12 Card-Level Indicators
Card-Level Indicators Description
Red FAIL LED The red FAIL LED indicates that the card processor is not ready. It is steady
while the self-test runs, and blinks during provisioning.
Replace the card if the red FAIL LED persists.
ACT/STBY LED
Green (Active)
Amber (Standby)
When the ACT/STBY LED is green, the DS3XM-12 card is operational and
ready to carry traffic. When the ACT/STBY LED is amber, the DS3XM-12
card is operational and in standby in a 1:1 protection group.
Amber SF LED The amber SF LED indicates a signal failure or condition such as LOS, LOF,
or high BER on one or more card ports.
To Next Page
Loading...
