Index
IN-2
Cisco ONS 15454 Reference Manual, R7.0.1
OL-9217-01
loading 11
modifying 10
saving 11
alarms
alarm suppressed by user 14
alarm suppression with OOS,MT 3, 13, 3
autodelete 4
changing default severities. See alarm profiles
circuits affected 5
deleting 4
entries in session 7
filter 4
history 7
log buffer capacities 9
profiles. See alarm profiles
severities. See alarm profiles
synchronizing 4
time zone 4
traps. See SNMP
viewing 2
AMP Champ EIA
cable management 55
card protection description 12
connectors per side 5
description 28
pin assignments 30
applying alarm profiles 13
assigning Superuser privileges to Provisioning users 6
audit trail
capacities 8
description 7
automatic protection switching
XC10G card switch matrix 19
XCVT card switch matrix 15
XC-VXC-10G card switch matrix 22
B
backplane connections
AEP connections 57
alarm contacts 66
AMP Champ 30
backplane pin field 64
BNC 18
LAN connections 67
MiniBNC 23
timing connections 67
TL1 craft interface connections 68
UBIC-H 35, 40, 42, 46, 48
backplane covers
description 10
illustration 11
lower backplane cover 11
rear plastic cover 12
backplane ground posts 64
backplane IP address. See secure mode
bandwidth
allocation and routing 27
four-fiber BLSR capacity 9
line percentage used by CE-Series Ethernet cards 40
line percentage used by E-Series Ethernet cards 31
line percentage used by G-Series Ethernet cards 33
line percentage used by the FC_MR-4 card 47
specifications 1
two-fiber BLSR capacity 9
bay assembly 6
BBE-PM parameter 5
BBER-PM parameter 5
BBER-SM parameter 5
BBE-SM parameter 5
bidirectional line switched ring. See BLSR
BIEC parameter 5
BITS
external node timing source 1
input and output on the TCC2 card 8
input and output on the TCC2P card 12
interface specifications 3
pin field assignments 67
To Next Page
Loading...
