Cisco ONS 15454 - Page 87

• OTDR-BASELINE-A-EXCEEDED-TX
• OTDR-BASELINE-A-EXCEEDED-RX
• OTDR-BASELINE-R-EXCEEDED-TX
• OTDR-BASELINE-R-EXCEEDED-RX
For more information on the OTDR alarms, see Cisco ONS 15454 DWDM Troubleshooting Guide, Release
10.x.x
Step 5 Enter the absolute ORL threshold values in the TX and RX directions.
The following alarms are raised when the scan results for ORL exceeds the threshold values:
• OTDR-ORL-THRESHOLD-EXCEEDED-TX
• OTDR-ORL-THRESHOLD-EXCEEDED-RX
Step 6 Click Apply.
Step 7 Return to your originating procedure (NTP).
Turning Up a Node
87
Turning Up a Node
DLP-G784 Configuring Threshold Values for OTDR Scan