EasyManuals Logo

Cisco PowerVu D9858 User Manual

Cisco PowerVu D9858
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
A-4 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
DVB-S/DVB-S2
DVB-S/DVB-S2 Satellite Receiver
Parameter
Specification
L-Band Input
Number of Inputs 4
Input Connector Type F-type, female, 75 Ω
Input Impedance 75 Ω
Return Loss > 10 dB
Isolation Between Inputs 40 dB
L-band Frequency 950 to 2150 MHz, 1 MHz steps
Tuning Frequency Step Size 1 MHz
Receive Spectrum SenseNormal and Inverted
L-Band Power
Input Power Level per Carrier -25 to -65 dBm (full transponder power)
DVB-S Modulation (EN 300 421)
Modulation QPSK
Convolutional FEC Rates 1/2, 2/3, 3/4, 5/6, 7/8
Symbol Rate Range 1.0 to 45 MSymbols/s
Eb/No (C/N) Ratio See DVB-S2 Satellite Receiver Input, DVB-S
Eb/No (C/N) Ratio Table
DVB-S2 Modulation (EN 302 307)
Modulation QPSK, 8PSK
Pilot On/Off Pilot On
QPSK LDPC FEC Rates 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK LDPC FEC Rates 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LDPC FEC Frame Length Normal
Symbol Rate Range 1 to 30 Ms/s
Maximum Channel Bit Rate 90 Mbit/s
Maximum User Bit Rate 83 Mbit/s

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco PowerVu D9858 and is the answer not in the manual?

Cisco PowerVu D9858 Specifications

General IconGeneral
BrandCisco
ModelPowerVu D9858
CategoryTranscoder
LanguageEnglish