3-12 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Connecting the ASI Outputs
To Connect the ASI Output
Do as follows to connect to the ASI outputs:
1. Connect the output signal from the D9858 Advanced Receiver Transcoder ASI
OUT connectors. All three outputs, ASI OUT 1, 2 and 3 are identical.
2. Use a Belden “Brilliance“ cable with foil/braid construction. The shield must
provide 99% or better shielding effectiveness.
The equipment after the D9858 Advanced Receiver Transcoder could be a
Model D9887 HDTV Modular Receiver or Model D9854 Advanced Program
Receiver.
To Next Page
Loading...
Need help?
General