4-16 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Status Menu: TS Input
SymRate
Description: Indicates the Symbol Rate of the received signal.
Parameters: Msymbols/second.
FEC
Description: Indicates the FEC (Forward Error Correction) rate of the received
signal.
Parameters: N/A, 1/2, 2/3, 3/4, 5/6, 7/8, 8/9 or Auto.
Modulation
Description: Indicates the modulation type for the received signal.
Parameters: N/A, QPSK, 8PSK, DVB-S or DVB-S2.
IQ
Description: Indicates the IQ (Input Signal Inversion) for the received signal.
Parameters: Inv, NonInv or Auto.
Pol
Description: Indicates the signal polarization setting. This setting is only
applicable when LNB Power is set to H-NIT or V-NIT. The selected
setting must match the polarization of the transmitted signal.
Parameters: Hor, Vert or Auto.
Dnlk Freq
Description: Indicates the current downlink frequency.
Parameters: GHz.
L-Band
Description: Indicates the current L-Band frequency.
Parameters: MHz.
Pilot Present
Description: Indicates whether a Pilot is present for the received signal. The Pilot
is set on the modulator for input signal synchronization purposes.
Parameters: Yes or No.
C/N
Description: Indicates the current Carrier-to-Noise rate.
Parameters: dBm.
C/N Margin
Description: Indicates the current Carrier-to-Noise Margin for the received
signal. The Carrier-to-Noise margin is the actual distance that C/N
is from the noise threshold.
To Next Page
Loading...
Need help?
General