4-12 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Status Menu: General
GENERAL
Input
Description: Indicates the active input port receiving the signal.
Status
Description: Indicates the current signal lock status for the selected RF input.
Parameters: Signal Lock - see table.
Rate
Description: Indicates the bit rate of the received input signal
Parameters: Mbps.
Level
Description: Indicates the signal level of received signal.
Parameters: dBm.
CASys
Description: Indicates the Conditional Access (CA) system used for the received
signal.
Parameters: SA or BISS.
Mode
Description: Indicates the type of CA used for the received signal, e.g., SA or
BISS.
Auth
Description: Indicates whether the transcoder is authorized to receive the signal.
Parameters: Yes or No.
Status Description
Locked Indicates the transcoder is locked to a
carrier with no valid content.
Lock+Sync Indicates the transcoder is locked to a
carrier with valid content.
No Lock Indicates the transcoder is not locked to a
carrier.
To Next Page
Loading...
Need help?
General