4-14 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Status Menu: Services
SERVICES
VIDEO
Video
Description: Indicates the input stream type and source resolution of the
received signal/program.
Parameters: SD480i/2997, SD480i/3000, SD576i/2500, HD720p/5000, HD720p/
5994, HD720p/6000, HD1080i/2500, HD1080i/2997, HD1080i/
3000, Unknown or Unsupported.
Rate
Description: Indicates the bit rate of the received video program.
3:2 Pulldown
Description: Indicates whether 3:2 pulldown mode is detected.
Parameters: Yes, No or Recent.
FPS
Description: Indicates the frame rate in frames per second.
Stream AR
Description: Indicates the stream aspect ratio. This is the conversion that the
transcoder will perform on the incoming signal for the picture to be
displayed correctly (i.e., to correspond to the aspect ratio of your
TV) on your TV, based on your selection.
Parameters: 4:3, 14:9 or 16:9.
Act Conv
Description: This is the type of aspect ratio conversion that the transcoder will
perform based on your selection.
Parameters: None, 4:3 L/B, 4:3 P/B, 14:9, 14:9, 4:3 F/H, or 16:9 F/W.
AUDIO
AUD
Description: Indicates the audio channel within the stream when the signal
contains more than two audio pairs.
Parameters: AUD1 for audio channel Aud1.
AUD2 for audio channel Aud2.
AUD1 to AUD4 for two stereo audio channels.
Format
Description: Indicates the received audio channel format.
Parameters: MPEG, AC3, AAC, HEAAC or DDP.
To Next Page
Loading...
Need help?
General