5-4 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Messages
General
The status of the D9858 Advanced Receiver Transcoder and its immediate
surroundings is reported to the front panel in the form of messages and alarms. You
can enable or disable messages in the Alarm/Warning settings.
D9858 Advanced Receiver Transcoder Message List
The following table shows an alphabetical list of the available messages and their
default alarm status. The Set Messages and Clear Messages are displayed in the
Warning History when the messages are set or cleared respectively.
Note: Only alarm conditions can be used to trigger rear panel relays to control
external alarm equipment. Warnings are not associated with relay operation.
Alarms
Alarm Message
Type
Message Cause/Remedy Description Severity
Signal Status Set ASI Signal - No
Content
Cause: Loss of RF
external to IRD.
Remedy: Check RF
settings.
Loss of Signal Minor
Signal is lost
Clear Signal is locked
To Next Page
Loading...
Need help?
General