Cisco SPA525G User Manual

Using the SPA932 Attendant Console
Monitoring the SPA932
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 104
6
The functions of SPA932 buttons may differ depending on configuration. However,
in general, you can:
• Monitor an extension by viewing its color. A steady red color usually
indicates the extension is in use. A green color indicates the line is free.
Blinking red indicates the line is ringing. Orange indicates a line error. A line
button with no color is not configured.
• Transfer a call by pressing the line button on the SPA932 when an incoming
call is ringing.
• Dial a configured extension by pressing the green line button on the
SPA932.
• Pick up a call ringing at the extension by pressing the flashing red line
button.
Monitoring the SPA932
To view the status of the SPA932, perform the following steps:
STEP 1 Press the Setup button.
STEP 2 Scroll to Status and press Select.
STEP 3 Scroll to Peripheral Status and press Select.
STEP 4 The status is shown in the “Att Cons” fields.

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD