Using Advanced Phone Features
Monitoring/Accessing Another Phone from Your Phone
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 74
4
Configuring Auto Answer
To configure your phone to auto answer pages:
STEP 1 Press the Setup button.
STEP 2 Scroll to User Preferences and press Select.
STEP 3 Select Call Preferences.
STEP 4 Scroll to Auto Answer Page. Press the Right Arrow key to choose On.
STEP 5 Press Save.
Monitoring/Accessing Another Phone from Your Phone
Your phone administrator may configure your phone so that you can monitor other
user’s phones from your phone. If this feature is configured, some line buttons on
your phone are assigned to display the status of another user’s phone. For
example, if your line 4 is configured to display Bob’s phone line, the LED color
shows you the status of his phone line:
• Green: Line is idle.
• Red (steady): Line is active or in use.
• Red (blinking): Line is ringing.
• Orange (solid): Line is unregistered (cannot be used).
• Orange (blinking): Line is not configured properly.
In addition, if your phone administrator has configured it, you can press the same
line button (4) to speed dial Bob’s extension, or to pick up a ringing call at his
extension.
To Next Page
Loading...
Need help?
General
