Cisco SPA525G

Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 55
3
To unpark if you know the park line number:
STEP 1 Press the Unpark button.
STEP 2 Enter the number identifier of the park line (for example, the number that was
entered in Step 2 of “parking a call.”)
STEP 3 Press Dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
STEP 1 Press the Setup button.
STEP 2 Select Status.
STEP 3 Scroll to Call Park Status and press Select.
STEP 4 Choose the parked call you want to retrieve and press Unpark.
Placing a Three-Way Conference Call
To initiate a conference call:
STEP 1 Press the Conf button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 Press the Conf button again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected. To keep the other
parties in a call, but disconnect yourself from the call, press Join.