Cisco SPA525G User Manual

Installing Your Phone
Connecting Your Phone’s Power
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 32
2
STEP 3 Rotate the tab 180° and re-insert into the phone base. The tab now catches the
slot in the handset when the handset is placed onto the cradle.
Connecting Your Phone’s Power
If you are using an external power source, plug it into the building’s power source,
and plug the power supply into the phone base. See Figure 1 on page 27, item #2.
NOTE: The SPA525G does not ship with a
power supply. If you are not using Power over
Ethernet (PoE), you must order the PA-100
power supply separately from Cisco.

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD