Cisco SPA525G User Manual

Getting Started
Overview of the Cisco SPA525G IP Phone
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 12
1
Overview of the Cisco SPA525G IP Phone
The Cisco SPA525G IP Phone is a full-featured VoIP (Voice over Internet Protocol)
phone that provide voice communication over an IP network. It provides traditional
features, such as call forwarding, redialing, speed dialing, transferring calls,
conference calling and accessing voice mail. Calls can be made or received with a
handset, headset or speaker.
The SPA525G phone is connected to the network through its Ethernet connection
or the built-in Wireless-G connection. If you are using the Wireless-G connection, a
separate power adapter (PA-100) is required. The SPA525G provides an additional
Ethernet port that allows a computer to be connected to the network through the
IP phone. (This option is only available when phone is connected to the network
via the wired Ethernet connection).
Unlike traditional phones, the Cisco SPA525G requires a separate power source.
Either connect your phone to an Ethernet switch that provides Power over Ethernet
(PoE), or use a separate power adapter (PA-100).

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD