Cisco SPA525G User Manual

Using Basic Phone Functions
Setting Do Not Disturb
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 51
3
Forwarding Calls When You Don’t Answer the Phone
STEP 1 In the Call Preferences screen, scroll to Forward No Ans Number.
STEP 2 Enter “vm” for voice mail, or a number to which to forward all calls; for example,
another extension, or an outside line. If forwarding calls to an outside line, be sure
to enter any access and area codes required.
STEP 3 Press Save.
Delaying Call Forwarding When You Don’t Answer the Phone
STEP 1 In the Call Preferences screen, scroll to Forward No Ans Delay.
STEP 2 Enter the number of seconds to delay forwarding calls, if there is no answer at your
phone.
STEP 3 Press Save.
Stopping Call Forwarding
To stop forwarding calls:
STEP 1 Under Call Forwarding , press the Right Arrow key to turn call forwarding Off.
STEP 2 Press the Save softkey.
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
The call is forwarded to the call forward destination for the phone. If no call
forward destination is set, the phone simply stops ringing.
You can activate Do Not Disturb for all incoming calls or for a call that is currently
ringing.

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD