Cisco SPA525G User Manual

Using Basic Phone Functions
Resuming a Call
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 46
3
If you have shared lines configured on your phone, your phone might support a
“private hold” softkey. Pressing the PrivHold softkey places a call on private hold
so that only you can resume this call. F
or example, the call cannot be resumed by
someone whose phone is configured to share your phone lines.
Resuming a Call
To resume the call, press the flashing red line button for the call. If you have
multiple calls, all calls are put on hold except the active call.
Ending a Call
To end a call:
• If you are using the handset, hang up.
• If you are using the speakerphone, press the Speaker button.
• If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
Transferring Calls
You can perform two types of transfers:
• Attended—You call the person to whom you are transferring the call and
speak to them before transferring the call.
• Blind—You transfer the call without speaking to the other party to which you
are transferring the call.

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD