Cisco SPA525G User Manual

Using Basic Phone Functions
Setting Do Not Disturb
Cisco Small Business Pro IP Phone SPA525G (SIP) User Guide 52
3
You can also set Do Not Disturb from your PC using the IP Phone Web Interface;
see the ”Setting Do Not Disturb” section on page 90.
To set Do Not Disturb for all new calls, choose one of the following options:
• Press the Do Not Disturb softkey on your phone. The LCD screen indicates that
Do Not Disturb is turned on for your phone; or
• Press the Setup button and select User Preferences. Then:
STEP 1 Choose Call Preferences.
STEP 2 Scroll to Do Not Disturb .
STEP 3 Press the Right Arrow key to turn Do Not Disturb on.
STEP 4 Press Save.
To set Do Not Disturb for a call that is currently ringing, press the Ignore softkey on
your phone. The ringing stops. When the call ends, the LCD screen indicates that
there is a Missed Call. Do Not Disturb is inactivated. The next new call will ring the
phone.
To turn off Do Not Disturb, choose one of the following options:
• Press the Clr DND softkey on your phone; or
• Press the Setup button and select User Preferences. Then:
STEP 1 Choose Call Preferences.
STEP 2 Scroll to Do Not Disturb .
STEP 3 Press the Right Arrow key to turn Do Not Disturb Off.
STEP 4 Press Save.

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD