EasyManua.ls Logo

Cisco TelePresence SX10 - Xcommand Peripherals Pairing Unpair; Xcommand Peripherals Purge; Phonebook Commands; Xcommand Phonebook Contact Add

Cisco TelePresence SX10
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 105
Cisco TelePresence SX10
API Reference Guide
xCommand Peripherals Pairing Unpair
Unpair endpoint from an ISDN Link, when the two have contact.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Unpair MacAddress: "MacAddress"
where
MacAddress
: String (1, 100)
MacAddress: Enter the MAC address for the ISDN Link you wish to unpair from the
endpoint.
xCommand Peripherals Purge
Force unpair an endpoint from an ISDN Link when a connection has been lost. Note: You must
also unpair the ISDN Link to be able to pair it to another endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Peripherals Purge ID: "ID"
where
ID
: String (1, 100)
Mac address of the ISDN Link in the format "xx:xx:xx:xx:xx:xx".
Phonebook commands
xCommand Phonebook Contact Add
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook Contact Add Name: "Name" [FolderId: "FolderId"] [ImageURL:
"ImageURL"] [Title: "Title"] [Number: "Number"] [Protocol: Protocol] [CallRate:
CallRate] [CallType: CallType] [Device: Device] [Tag: Tag]
where
Name
: String (0, 255)
The name of the contact.
FolderId
: String (0, 255)
The unique identifier for the folder that you want to store the contact in. The identifier
will be returned by an xCommand Phonebook Search command. It was also returned
when the xCommand Phonebook Folder Add command was issued to make the folder.
ImageURL
: String (0, 255)
Currently not in use.
T itle
: String (0, 255)
The title of the contact.
Number
: String (0, 255)
The phone number or address of the contact.
Protocol
: Auto/H320/H323/SIP/Spark
Select the Auto, Spark, SIP, H323 or H320 protocol.
CallRate
: Integer (0..6000)
Set a call rate.
CallType
: Audio/Video
Select a call type (audio or video).
Device
: Mobile/Other/Telephone/Video
Select the device type.
Tag
: Untagged/Favorite
Tag the contact as a Favorite, or untag an already tagged contact.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus
xCommand

Table of Contents

Other manuals for Cisco TelePresence SX10

Related product manuals