Cisco TelePresence SX10 - About Disconnect Cause Types

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 186
Cisco TelePresence SX10
API Reference Guide
About disconnect cause types
The following parameters are logged when a call is discon-
nected. The disconnect cause types are used in disconnect
events (xEvent).
CauseValue Proprietary. We recomend the use of CauseType and CauseCode.
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: “LocalDisconnect”
CauseString: “”
OrigCallDirection: “outgoing”
RemoteURI: “firstname.lastname@company.com”
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

Appendices