Cisco TelePresence SX10 - Xcommand Phonebook Contact Delete; Xcommand Phonebook Contact Modify

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 106
Cisco TelePresence SX10
API Reference Guide
xCommand Phonebook Contact Delete
Delete an existing contact from the local phonebook.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook Contact Delete ContactId: "ContactId"
where
ContactId : String (0, 255)
The unique identifier for the contact. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook
Contact Add command was issued to make the contact.
xCommand Phonebook Contact Modify
Modify contact details of an existing contact in the local phonebook. The following parameters
can be changed using this command: Name, FolderId, ImageURL and Title. You must use the
xCommand Phonebook ContactMethod Modify command to change the other parameters:
Number, Protocol, CallRate, CallType and Device.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook Contact Modify ContactId: "ContactId" [Name: "Name"]
[FolderId: "FolderId"] [ImageURL: "Imag eURL"] [Title: "Title"] [Tag: Tag]
where
ContactId : String (0, 255)
The unique identifier for the contact you want to modify. The identifier will be returned
by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook Contact Add command was issued to make the contact.
Name : String (0, 255)
The name of the contact.
FolderId : String (0, 255)
A unique identifier for the folder. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook
Folder Add command was issued.
ImageURL : String (0, 255)
Currently not in use.
T itle : String (0, 255)
The title of the contact.
Tag : Untagged/Favorite
Tag the contact as a Favorite, or untag an already tagged contact.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand