Cisco TelePresence SX10 - Xstatus Network 1 CDP Duplex; Xstatus Network 1 CDP Platform; Xstatus Network 1 CDP Portid; Xstatus Network 1 CDP Primarymgmtaddress

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 155
Cisco TelePresence SX10
API Reference Guide
xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network 1 CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
xStatus Network 1 CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
xStatus Network 1 CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
xStatus Network 1 CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus