Cisco TelePresence SX10 - Xstatus Mediachannels Call [N] Channel [N] Netstat Lastintervalreceived; Xstatus Mediachannels Call [N] Channel [N] Netstat Loss; Xstatus Mediachannels Call [N] Channel [N] Netstat Maxjitter; Xstatus Mediachannels Call [N] Channel [N] Netstat Packets

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 152
Cisco TelePresence SX10
API Reference Guide
xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalReceived
Shows the number of packets received for audio, video or data during the last interval on the
incoming or outgoing channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived
*s MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived: 289
** end
xStatus MediaChannels Call [n] Channel [n] NetStat Loss
Shows the number of packets lost for audio, video or data on the incoming or outgoing
channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Loss
*s MediaChannels Call 27 Channel 327 NetStat Loss: 0
** end
xStatus MediaChannels Call [n] Channel [n] NetStat MaxJitter
Shows the maximum jitter for audio, video or data that has been measured during last interval
(about 5 seconds).
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat MaxJitter
*s MediaChannels Call 27 Channel 327 NetStat MaxJitter: 2
** end
xStatus MediaChannels Call [n] Channel [n] NetStat Packets
Shows the number of packets that was received or sent for audio, video or data on the incom-
ing or outgoing channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Packets
*s MediaChannels Call 27 Channel 327 NetStat Packets: 1551
** end
xStatus MediaChannels Call [n] Channel [n] ParticipantId
Shows the ID of the Active Control participant on the incoming audio or video channel.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus MediaChannels Call 27 Channel 327 ParticipantId
*s MediaChannels Call 27 Channel 327 ParticipantId: ""
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus