Cisco TelePresence SX10 - Xconfiguration Standby Bootaction; Xconfiguration Standby Standbyaction; Xconfiguration Standby Wakeupaction

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 70
Cisco TelePresence SX10
API Reference Guide
xConfiguration Standby BootAction
Define the camera position after a restart of the codec.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby BootAction: BootAction
where
BootAction : None/DefaultCameraPosition/RestoreCameraPosition
None: No action.
RestoreCameraPosition: When the video system restarts, the camera returns to the
position that it had before the restart.
DefaultCameraPosition: When the video system restarts, the camera moves to the
factory default position.
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN, INTEGRATOR
Default value: PrivacyPosition
USAGE:
xConfiguration Standby StandbyAction: Standb yAction
where
StandbyAction : None/PrivacyPosition
None: No action.
PrivacyPosition: When the video system enters standby, the camera turns to a sideways
position for privacy.
xConfiguration Standby WakeupAction
Define the camera position when leaving standby mode.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby WakeupAction: WakeupAction
where
WakeupAction : None/RestoreCameraPosition/DefaultCameraPosition
None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to
the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to
the factory default position.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration