EasyManua.ls Logo

Cisco TelePresence SX10 - Xconfiguration Conference Maxtransmitcallrate; Xconfiguration Conference Maxtotalreceivecallrate; Xconfiguration Conference Maxtotaltransmitcallrate; Xconfiguration Conference Multistream Mode

Cisco TelePresence SX10
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 41
Cisco TelePresence SX10
API Reference Guide
xConfiguration Conference MaxTransmitCallRate
Define the maximum transmit bit rate to be used when placing or receiving calls. Note that this
is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate
setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN
Default value: 3072
USAGE:
xConfiguration Conference MaxTransmitCallRate: MaxTra nsmitCallRate
where
MaxTransmitCallRate
: Integer (64..3072)
The maximum transmitt call rate (kbps).
xConfiguration Conference MaxTotalReceiveCallRate
Define the maximum overall receive bit rate allowed. This product does not support multiple
simultaneous calls, so the total receive call rate will be the same as the receive bit rate for one
call (ref. Conference MaxReceiveCallRate setting).
Requires user role: ADMIN
Default value: 3072
USAGE:
xConfiguration Conference MaxTotalReceiveCallRate: MaxTotalReceiveCallRate
where
MaxTotalReceiveCallRate
: Integer (64..3072)
The maximum receive call rate (kbps).
xConfiguration Conference MaxTotalTransmitCallRate
Define the maximum overall transmit bit rate allowed. This product does not support multiple
simultaneous calls, so the total transmit call rate will be the same as the transmit bit rate for one
call (ref. Conference MaxTransmitCallRate setting).
Requires user role: ADMIN
Default value: 3072
USAGE:
xConfiguration Conference MaxTotalTransmitCallRate: MaxTotalTransmitCallRate
where
MaxTotalTransmitCallRate
: Integer (64..3072)
The maximum transmit call rate (kbps).
xConfiguration Conference MultiStream Mode
The video system supports multistream video for conferences.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Conference MultiStream Mode: Mode
where
Mode
: Off
Off: Multistream is disabled.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus
xConfiguration

Table of Contents

Other manuals for Cisco TelePresence SX10

Related product manuals