Cisco TelePresence SX10 - Presentation Commands; Xcommand Presentation Start; Xcommand Presentation Stop

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 110
Cisco TelePresence SX10
API Reference Guide
Recursive : False/True
This parameter will only have effect when searching the local phone book. The setting
determines whether a local phone book search should be limited to the given FolderId,
or also recursively search in its subfolders. If not specified, the search will be recursive.
When issuing the command without specifying any parameters, all folders, contacts and
contact methods in the local phone book will be returned.
C ontactType : Any/Folder/Contact
Search all contact types, or limit the search to folders or individual contacts.
Tag : Untagged/Favorite
Limits the search to either contacts that have been tagged as favorite or the untagged
contacts.
Presentation commands
xCommand Presentation Start
Open a media stream from the selected presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Start [PresentationSource: PresentationSource]
[SendingMode: SendingMode] [ConnectorId: ConnectorId] [Instance: Instance]
where
PresentationSource : Integer (2..2)
Select the video input source to be used for presentation, identified by source number.
SendingMode : LocalRemote/LocalOnly
Select whether the presentation is shown locally or locally and remotely.
ConnectorId : Integer (2..3)
Select the video input source to be used for presentation, identified by connectorId.
Instance : New/1/2/3/4/5/6
Select which local presentation instance you wish to start.
xCommand Presentation Stop
Stop the media stream from the presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Stop [Instance: In stance] [PresentationSource:
PresentationSource]
where
Instance : 1/2/3/4/5/6
Select which local presentation you wish to stop, identified by presentation instance.
PresentationSource : Integer (2..2)
Select which local presentation you wish to stop, identified by source number.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand