Cisco TelePresence SX10 - Proximity Configuration; Xconfiguration Proximity Mode; Xconfiguration Proximity Services Callcontrol; Xconfiguration Proximity Services Contentshare Fromclients

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 65
Cisco TelePresence SX10
API Reference Guide
Proximity configuration
xConfiguration Proximity Mode
Determine whether the video system will emit ultrasound pairing messages or not.
When the video system emits ultrasound, Proximity clients can detect that they are close to the
video system. In order to use a client, at least one of the Proximity services must be enabled
(refer to the Proximity Services settings). In general, Cisco recommends enabling all the
Proximity services.
Requires user role: ADMIN, USER
Default value: Off
USAGE:
xConfiguration Proximity Mode: Mode
where
Mode : Off/On
Off: The video system does not emit ultrasound, and Proximity services cannot be used.
On: The video system emits ultrasound, and Proximity clients can detect that they are
close to the video system. Enabled Proximity services can be used.
xConfiguration Proximity Services CallControl
Enable or disable basic call control features on Proximity clients. When this setting is enabled,
you are able to control a call using a Proximity client (for example dial, mute, adjust volume and
hang up). This service is supported by mobile devices (iOS and Android). Proximity Mode must
be On for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Disabled
USAGE:
xConfiguration Proximity Services CallControl: CallControl
where
CallControl : Enabled/Disabled
Enabled: Call control from a Proximity client is enabled.
Disabled: Call control from a Proximity client is disabled.
xConfiguration Proximity Services ContentShare FromClients
Enable or disable content sharing from Proximity clients. When this setting is enabled, you can
share content from a Proximity client wirelessly on the video system, e.g. share your laptop
screen. This service is supported by laptops (OS X and Windows). Proximity Mode must be On
for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Enabled
USAGE:
xConfiguration Proximity Services ContentShare FromClients: FromClients
where
FromClients : Enabled/Disabled
Enabled: Content sharing from a Proximity client is enabled.
Disabled: Content sharing from a Proximity client is disabled.
xConfiguration Proximity Services ContentShare ToClients
Enable or disable content sharing to Proximity clients. When enabled, Proximity clients will
receive the presentation from the video system. You can zoom in on details, view previous
content and take snapshots. This service is supported by mobile devices (iOS and Android).
Proximity Mode must be On for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Disabled
USAGE:
xConfiguration Proximity Services ContentShare ToClients: ToClients
where
ToClients : Enabled/Disabled
Enabled: Content sharing to a Proximity client is enabled.
Disabled: Content sharing to a Proximity client is disabled.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration