Cisco TelePresence SX10 - Xstatus Mediachannels Call [N] Channel [N] Video Resolutionx; Xstatus Mediachannels Call [N] Channel [N] Video Resolutiony; Network Status; Xstatus Network 1 CDP Address

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 154
Cisco TelePresence SX10
API Reference Guide
xStatus MediaChannels Call [n] Channel [n] Video ResolutionX
Shows the width (resolution in direction X) of the incoming or outgoing video.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 Video ResolutionX
*s MediaChannels Call 27 Channel 327 Video ResolutionX: 1920
** end
xStatus MediaChannels Call [n] Channel [n] Video ResolutionY
Shows the width (resolution in direction Y) of the incoming or outgoing video.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 Video ResolutionY
*s MediaChannels Call 27 Channel 327 Video ResolutionY: 1080
** end
Network status
xStatus Network 1 CDP Address
Returns the first network address of both receiving and sending devices.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
xStatus Network 1 CDP Capabilities
Describes the functional capability for the switch in form of a device type. See documentation
for CDP protocol for more information.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
xStatus Network 1 CDP DeviceId
Identifies the name of the switch in form of a character string.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus