Cisco TelePresence SX10 - Xconfiguration Provisioning Externalmanager Alternateaddress; Xconfiguration Provisioning Externalmanager Protocol; Xconfiguration Provisioning Externalmanager Path; Xconfiguration Provisioning Externalmanager Domain

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 64
Cisco TelePresence SX10
API Reference Guide
xConfiguration Provisioning ExternalManager AlternateAddress
Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager
(CUCM) and an alternate CUCM is available for redundancy. Define the address of the alternate
CUCM. If the main CUCM is not available, the endpoint will be provisioned by the alternate
CUCM. When the main CUCM is available again, the endpoint will be provisioned by this CUCM.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager AlternateAddress: "AlternateAddr ess"
where
Alter nateAddress : String (0, 64)
A valid IPv4 address, IPv6 address or DNS name.
xConfiguration Provisioning ExternalManager Protocol
Define whether to use the HTTP (unsecure communication) or HTTPS (secure communication)
protocol when sending requests to the external manager / provisioning system.
The selected protocol must be enabled in the NetworkServices HTTP Mode setting.
Requires user role: ADMIN, USER
Default value: HTTP
USAGE:
xConfiguration Provisioning ExternalManager Protocol: Protocol
where
Protocol : HTTPS/HTTP
HTTPS: Send requests via HTTPS.
HTTP: Send requests via HTTP.
xConfiguration Provisioning ExternalManager Path
Define the Path to the external manager / provisioning system. This setting is required when
several management services reside on the same server, i.e. share the same External Manager
address.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Path: "Path"
where
Path : String (0, 255)
A valid path to the external manager or provisioning system.
xConfiguration Provisioning ExternalManager Domain
Define the SIP domain for the VCS provisioning server.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Domain: "Domain"
where
Domain : String (0, 64)
A valid domain name.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration