Cisco TelePresence SX10 - Capabilities Status; Xstatus Capabilities Conference Maxactivecalls; Xstatus Capabilities Conference Maxaudiocalls; Xstatus Capabilities Conference Maxcalls

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 141
Cisco TelePresence SX10
API Reference Guide
Capabilities status
xStatus Capabilities Conference MaxActiveCalls
Shows the the maximum number of simultaneous active calls. Calls that are set on hold/transfer
are not counted as active.
Requires user role: ADMIN, USER
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxNumberOfActiveCalls
*s Capabilities Conference MaxNumberOfActiveCalls: 3
** end
xStatus Capabilities Conference MaxAudioCalls
Shows the the maximum number of simultaneous audio calls that is supported.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Capabilities Conference MaxAudioCalls
*s Capabilities Conference MaxAudioCalls: 3
** end
xStatus Capabilities Conference MaxCalls
Shows the the maximum number of simultaneous calls.
Requires user role: ADMIN, USER
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxCalls
*s Capabilities Conference MaxCalls: 3
** end
xStatus Capabilities Conference MaxVideoCalls
Shows the the maximum number of simultaneous video calls that is supported.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Capabilities Conference MaxVideoCalls
*s Capabilities Conference MaxVideoCalls: 3
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus