Cisco TelePresence SX10 - Conference Status; Xstatus Conference Activespeaker Callid; Xstatus Conference Call [N] Bookingid; Xstatus Conference Call [N] Capabilities Farendmessage Mode

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 142
Cisco TelePresence SX10
API Reference Guide
Conference status
xStatus Conference ActiveSpeaker CallId
Shows the CallId of the current active speaker.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Conference ActiveSpeaker CallId
*s Conference ActiveSpeaker CallId: 3
** end
xStatus Conference Call [n] BookingId
Shows the booking ID of a conference (if assigned). The booking ID can be used for easy
identification of a call or conference.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Conference Call 2 BookingId
*s Conference Call 2 BookingId: "MyConference"
** end
xStatus Conference Call [n] Capabilities FarendMessage Mode
Not applicable in this release.
Requires user role: ADMIN, USER
Value space of the result returned:
On/Off
Example:
xStatus Conference Call Capabilities FarendMessage Mode
*s Conference Call 4 Capabilities FarendMessage Mode: Off
** end
xStatus Conference Call [n] Capabilities FECC Mode
Shows whether or not you have permission to control the input sources at a far end site.
On: Far end input source control is permitted.
Off: Far end input source control is not permitted.
Requires user role: ADMIN, USER
Value space of the result returned:
On/Off
Example:
xStatus Conference Call 2 Capabilities FECC Mode
*s Conference Call 2 Capabilities FECC Mode: On
** end
xStatus Conference Call [n] Capabilities FECC NumberOfPresets
Shows the number of presets available for the input sources at a far end site.
Requires user role: ADMIN, USER
Value space of the result returned:
1..15
Example:
xStatus Conference Call 2 Capabilities FECC NumberOfPresets
*s Conference Call 2 Capabilities FECC NumberOfPresets: 15
** end
xStatus Conference Call [n] Capabilities FECC NumberOfSources
Shows the number of input sources that can be connected at a far end site.
Requires user role: ADMIN, USER
Value space of the result returned:
1..5
Example:
xStatus Conference Call 2 Capabilities FECC NumberOfSources
*s Conference Call 2 Capabilities FECC NumberOfSources: 5
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus