Cisco TelePresence SX10 - H323 Status

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 148
Cisco TelePresence SX10
API Reference Guide
H323 status
xStatus H323 Gatekeeper Address
Displays the IP address of the gatekeeper where the system is registered.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Address
*s H323 Gatekeeper Address: "192.0.1.20"
** end
xStatus H323 Gatekeeper Port
Shows the port which is used when connecting to on the gatekeeper.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus H323 Gatekeeper Port
*s H323 Gatekeeper Port: 1719
** end
xStatus H323 Gatekeeper Reason
Shows the reason for rejected registration.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Reason
*s H323 Gatekeeper Reason: ""
** end
xStatus H323 Gatekeeper Status
Shows the gatekeeper registration status.
Requires user role: ADMIN, USER
Value space of the result returned:
Required/Discovering/Discovered/Authenticating/Authenticated/Registering/Registered/
Inactive/Rejected
Example:
xStatus H323 Gatekeeper Status
*s H323 Gatekeeper Status: Registered
** end
xStatus H323 Mode Reason
Shows whether there is a conflict between H.323 settings and xStatus H323 Mode Status.
“”: When H.323 is set to On and there is no conflict between H.323 Mode configuration and
the rest of the system settings.
“SIP is enabled”: When H.323 Mode is set to On and SIP is enabled on a system that does not
support the two simultaneously.
"Not available": When a system does not support H.323.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Mode Reason
*s H323 Mode Reason: ""
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus