Cisco TelePresence SX10 - Xcommand Camera Preset List; Xcommand Camera Preset Remove; Xcommand Camera Preset Show

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 98
Cisco TelePresence SX10
API Reference Guide
xCommand Camera Preset List
List information about available camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset List CameraId: CameraId [DefaultPosition:
DefaultPosition]
where
CameraId : Integer (1..1)
Only list presets for the specified camera.
DefaultPosition : False/True
List default positions only, or only those that are not default positions.
xCommand Camera Preset Remove
Remove a camera preset.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Remove PresetId: PresetId
where
PresetId : Integer (1..35)
The ID of the camera preset you want to remove.
xCommand Camera Preset Show
Shows the preset details for the requested PresetId.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Show PresetId: PresetId
where
PresetId : Integer (1..35)
The ID of the camera preset you wish to see.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand