D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 137
Cisco TelePresence SX10
API Reference Guide
xStatus Call [n] FacilityServiceId
When calling a facility service, the facility service id is shown. Otherwise the value 0 is returned.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
0..5
Example:
xStatus Call FacilityServiceId
*s Call 3 FacilityServiceId: 1
** end
xStatus Call [n] HoldReason
Shows the reason the current outgoing call was put on hold.
Conference: On hold while the call is being merged into a conference.
Transfer: On hold while the call is being transferred.
None: All other instances.
Requires user role: ADMIN, USER
Value space of the result returned:
Conference/Transfer/None
Example:
xStatus Call 2 HoldReason
*s Call 2 HoldReason: None
** end
xStatus Call [n] PlacedOnHold
Shows the placed on hold status of the call. You can run the command xStatus Call to find the
call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
True/False
Example:
xStatus Call 27 PlacedOnHold
*s Call 27 PlacedOnHold: False
** end
xStatus Call [n] Protocol
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call
to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
H320/H323/SIP/Spark/Unknown
Example:
xStatus Call 27 Protocol
*s Call 27 Protocol: "h323"
** end
xStatus Call [n] ReceiveCallRate
Shows the receive bandwidth in the call in kilobits per second (kbps). You can run the
command xStatus Call to find the call identity.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Call 27 ReceiveCallRate
*s Call 27 ReceiveCallRate: 4000
** end
To Next Page
Loading...
