Cisco TelePresence SX10 - Xconfiguration Cameras Camera [1] Focus Mode; Xconfiguration Cameras Camera [1] Mirror; Xconfiguration Cameras Camera [1] Whitebalance Mode; Xconfiguration Cameras Camera [1] Whitebalance Level

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 38
Cisco TelePresence SX10
API Reference Guide
xConfiguration Cameras Camera [1] Focus Mode
Define the camera focus mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n Focus Mode: Mode
where
n : Unique ID that identifies the camera. Range: 1..1
Mode : Auto/Manual
Auto: The camera will auto focus once a call is connected, as well as after moving the
camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set
the right focus; then auto focus is turned off to prevent continuous focus adjustments of
the camera.
Manual: Turn the autofocus off and adjust the camera focus manually.
xConfiguration Cameras Camera [1] Mirror
With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies both to
the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n Mirror: Mirror
where
n : Unique ID that identifies the camera. Range: 1..1
Mirror : Auto/Off/On
Auto: If the camera detects that it is mounted upside down, the image is automatically
mirrored. If the camera cannot auto-detect whether it is mounted upside down or not,
the image is not changed.
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.
xConfiguration Cameras Camera [1] Whitebalance Mode
Define the camera white balance mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n Whitebalance Mode: Mode
where
n : Unique ID that identifies the camera. Range: 1..1
Mode : Auto/Manual
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.
xConfiguration Cameras Camera [1] Whitebalance Level
Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be set
to manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Cameras Camera n Whitebalance Level: Level
where
n : Unique ID that identifies the camera. Range: 1..1
Level : Integer (1..16)
The white balance level.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration